You are here: Home > Firearms > Firearm Accessories > B&T Industries / Atlas
Choose a sub category:
Atlas 5-H Bipods Atlas Accessories
Atlas CAL Bipods Atlas Monopods
Atlas PSR Bipods Atlas V8 Bipods
B&T Industries
Just as the Accu-Shot brought rear stabilization into the modern era B&T Industries LLC did the same thing with the bipod which is used to support the front of a rifle. The Atlas bipod was introduced in 2010 with several patented features including multiple positioning legs, Pan, and Cant. All in a light weight strong package that has found favor with civilian, law enforcement and military riflemen around the world.
Sort By:
Page of 4
B&T Industries - BT1517: Rail Mounting fastener Set  - BT-BT1517
B&T Industries - BT1517: Rail Mounting fastener Set - BT-BT1517
Our Price: $8.99
9 Available

Used for mounting 1913 rails ( part numbers BT15 and BT17) consists of two (2) 10-32 T-Nuts and two (2) 10-32 x 3/4" Button Head Cap Screws.


more info
B&T Industries - Atlas Bipod PSR - BT-BT46-LW17
B&T Industries - Atlas Bipod PSR - BT-BT46-LW17
Our Price: $439.00
6 Available

While some choose to discover nothing, inspire no one and dream small, B&T have taken a different path. The Patented Atlas Bipod lines have brought new and unique features to the bipod that had not been seen before. Accept No Substitutions.

Tech Specs at a Glance:

Height Range: 4.75 - 9 inches

Mount: Rail mounted

Footprint Spread: 8 - 11 inches

Leg Positions: 5

Pan / Cant: 15 / 15 degrees
Leg Material: 7075-T6 Aluminum

Weight: 13.61 oz


more info
B&T Industries - BT34: 2.05" 1913 Rail - BT-BT34
B&T Industries - BT34: 2.05" 1913 Rail - BT-BT34
Our Price: $44.99
6 Available

The BT34 - 2.05" 1913 Rail has a center to center spacing of 1.6". Two machine screws can be used not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. It can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods. Available in black only..


more info
B&T Industries - BT15: 3.35" 1913 Rail - BT-BT15
B&T Industries - BT15: 3.35" 1913 Rail - BT-BT15
Our Price: $34.99
5 Available

The BT15 - 3.35 inch 1913 Rail will accommodate hole patterns with a center to center spacing of 1.76 - 2.78 inch and a relieved back to accommodate curved surfaces. A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE IS INCLUDED.


more info
B&T Industries - BT17: 4" 1913 Rail - BT-BT17
B&T Industries - BT17: 4" 1913 Rail - BT-BT17
Our Price: $49.99
5 Available

The BT17 - 4 inch 1913 Rail will accommodate hole patterns with a center to center spacing of 2.2 - 3.5 inch and a relieved back to accommodate curved surfaces. A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE IS INCLUDED..


more info
B&T Industries - Atlas Bipod V8 - BT-BT10
B&T Industries - Atlas Bipod V8 - BT-BT10
Our Price: $309.00
4 Available

The Atlas BT10 Bipod is constructed of T6061 Aluminum. It mounts directly to any 1913 style Picatinny rail using a low profile 2 screw clamp assembly. This bipod features built in pan and cant. It can be set in to five positions and has a knurled grip area. The feet are removable by pressing the pin and can be replaced with other optional feet from Atlas

Tech Specs at a Glance:

Height Range: 4.75 - 9 inches

Mount: Picatinny screw clamp

Footprint Spread: 8 - 11 inches

Leg Positions: 5

Pan / Cant: 15 / 15 degrees
Leg Material: 6061-T6 Aluminum

Weight: 11 oz


more info
B&T Industries - Atlas Bipod V8 - BT-BT10-LW17
B&T Industries - Atlas Bipod V8 - BT-BT10-LW17
Our Price: $389.00
4 Available

The Atlas BT10-LW17 Bipod is constructed of T6061 Aluminum. It features a quick release lever mount for any 1913 style Picatinny rail. This bipod features built in pan and cant. It can be set in to five positions and has a knurled grip area. The feet are removable by pressing the pin and can be replaced with other optional feet from Atlas

Tech Specs at a Glance:

Height Range: 4.75 - 9 inches

Mount: Quick release lever for Picatinny

Footprint Spread: 8 - 11 inches

Leg Positions: 5

Pan / Cant: 15 / 15 degrees
Leg Material: 6061-T6 Aluminum

Weight: 12.7 oz


more info
B&T Industries - Atlas Bipod PSR - BT-BT46-NC
B&T Industries - Atlas Bipod PSR - BT-BT46-NC
Our Price: $349.00
4 Available

The Atlas PSR BT46-NC No Clamp model. No Clamp meaning it does not have the means to attach to a rail and it requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance and LT271 or the BT10-NC will mount directly to an Atlas BT19 (AI) and BT21 (TRG) spigots.

Tech Specs at a Glance:

Height Range: 4.75 - 9 inches

Mount: None supplied

Footprint Spread: 8 - 11 inches

Leg Positions: 5

Pan / Cant: 15 / 15 degrees
Leg Material: 7075-T6 Aluminum

Weight: 11.42 oz


more info
B&T Industries - BT23: Atlas Ski Feet
B&T Industries - BT23: Atlas Ski Feet
Our Price: $69.00
4 Available

The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless steel plunger. They deliver a fully articulated smooth foot to support the bipod. Sold as a pair. Available in black only.


more info
B&T Industries - BT66: Atlas 5-H BAS Ski Feet
B&T Industries - BT66: Atlas 5-H BAS Ski Feet
Our Price: $124.00
4 Available

The BT64 Atlas Spiked Cleat Feet is our BT23 Atlas Cleat Feet with the addition of a stainless steel spike for an even more aggressive bite. They are easily easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless steel plunger. Sold as a pair. Available in black only.

more info