|
|
|
|
|
|
LimbSaver - Recoil Pad - 10011
|
12 Available
|
|
|
Reducing felt recoil by up to 70 percent, the customized LimbSaver Classic Precision-Fit Recoil Pad is designed to specifically fit. The recoil pad enables you to shoot longer without discomfort and bruising, while also helping to increase accuracy of follow-up shots and provide improved control for maximum stability. It is made from LimbSavers proprietary NAVCOM technology (Noise and Vibration Control Material), which effectively absorbs a wide range of frequencies to dissipate energy and vibration..
Features at a Glance:
Fits: Tikka T3x, Sako 75/Finnlight Synthetic
Material: NAVCOM
LOP increase: 1 inch
|
|
|
|
|
|
|
|
|
|
Spartan Precision Equipment - Javelin Lite Bipod - Standard
|
|
8 Available
|
|
|
Ultra Lightweight, fixed leg length, bipod utilizing the renowned Spartan Javelin mount system.
Tech Specs at a Glance:
Height Range: Fixed 5.7 inches
Mount: Spartan System
Footprint Spread: 6.4 inches
Traverse: 30 left + 30 right
Cant: None Leg Material: Carbon
Weight: 4.6 oz
|
|
|
|
|
|
|
|
|
|
B&T Industries - BT34: 2.05" 1913 Rail - BT-BT34
|
|
7 Available
|
|
|
The BT34 - 2.05" 1913 Rail has a center to center spacing of 1.6". Two machine screws can be used not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. It can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods. Available in black only..
|
|
|
|
|
|
|
|
|
|
B&T Industries - BT1517: Rail Mounting fastener Set - BT-BT1517
|
|
7 Available
|
|
|
Used for mounting 1913 rails ( part numbers BT15 and BT17) consists of two (2) 10-32 T-Nuts and two (2) 10-32 x 3/4" Button Head Cap Screws.
|
|
|
|
|
|
|
|
|
|
B&T Industries - Atlas CAL Bipod - BT-BT65 GEN 2
|
|
7 Available
|
|
|
The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature. Mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp.
Tech Specs at a Glance: Height Range: 4.75 - 9 inches
Mount: Low profile Picatinny
Footprint Spread: 9.75 - 13 inches
Leg Positions: 5
Pan / Cant: 0 / 15 degrees
Leg Material: 6061-T6 Aluminum
Weight: 12.87 oz
|
|
|
|
|
|
|
|
|
|
B&T Industries - Atlas CAL Bipod - Quick Lever - BT-BT65-LW17 GEN 2
|
|
6 Available
|
|
|
The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature. Mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever.
Tech Specs at a Glance: Height Range: 4.75 - 9 inches
Mount: ADM-170-S Lever
Footprint Spread: 9.75 - 13 inches
Leg Positions: 5
Pan / Cant: 0 / 15 degrees
Leg Material: 6061-T6 Aluminum
Weight: 15.196 oz
|
|
|
|
|
|
|
|
|
|
Spartan Precision Equipment - Javelin Lite Bipod - Long
|
|
6 Available
|
|
|
Ultra Lightweight, fixed leg length, bipod utilizing the renowned Spartan Javelin mount system.
Tech Specs at a Glance:
Height Range: Fixed 6.8 inches
Mount: Spartan System
Footprint Spread: 7.8 inches
Traverse: 30 left + 30 right
Cant: None Leg Material: Carbon
Weight: 4.7 oz
|
|
|
|
|
|
|
|
|
|
Spartan Precision Equipment - Javelin Lite Bipod - Mini
|
|
5 Available
|
|
|
Ultra Lightweight, fixed leg length, bipod utilizing the renowned Spartan Javelin mount system.
Tech Specs at a Glance:
Height Range: Fixed 4.5 inches
Mount: Spartan System
Footprint Spread: 4.5 inches
Traverse: 30 left + 30 right
Cant: None Leg Material: Carbon
Weight: 4.5 oz
|
|
|
|
|
|
|
|
|
|
B&T Industries - BT15: 3.35" 1913 Rail - BT-BT15
|
|
4 Available
|
|
|
The BT15 - 3.35 inch 1913 Rail will accommodate hole patterns with a center to center spacing of 1.76 - 2.78 inch and a relieved back to accommodate curved surfaces. A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE IS INCLUDED.
|
|
|
|
|
|
|
|
|
|
B&T Industries - BT17: 4" 1913 Rail - BT-BT17
|
|
4 Available
|
|
|
The BT17 - 4 inch 1913 Rail will accommodate hole patterns with a center to center spacing of 2.2 - 3.5 inch and a relieved back to accommodate curved surfaces. A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE IS INCLUDED..
|
|
|
|
