Home > Ammo/Reloading > Reloading Die Sets >

36163 - Redding Type-S Match Die Set - Full Length - 338 Winchester Mag
36163 - Redding Type-S Match Die Set - Full Length - 338 Winchester Mag
 
Alternative Views


Kit Includes:
  • Type S - Bushing Full Sizing Die
  • Competition Seating Die
  • Hard case die box
  • Hex wrench
Price: $299.00
Sale Price: $269.45

Quantity Available:1

Description
 
Redding Type-S Match Die Set - Full Length - 338 Winchester Mag - 36163:

Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The Type S - Full Length Resizing/Bushing Die accomplishes this task with the precision you would expect from Redding.

These dies use the same interchangeable bushings (.001" increments) as those used in Reddings bushing style neck sizing dies. The adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desired.

Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case. All Type S (except 17 and 20 Cal.) dies are supplied with both the standard size button and a decapping pin retainer. By removing the bushing and all internal parts, the Type-S full bushing die may also be used as a body die.


All Redding dies use the industry standard 7/8-14 threaded bodies.
Bushings are available in heat-treated steel or with a Titanium Nitride surface treatment for those who wish to minimize stress on the brass while sizing the necks.

It is important to note that the tolerances in this die are so tight that brass from an oversize or otherwise out of spec chamber may be sticky.

Kit Includes:
  • Type S - Bushing Full Sizing Die
  • Competition Seating Die
  • Hard case die box
  • Hex wrench